CDA CVC4SS User Manual

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01949 862 00

9Care and Maintenance DescalingIf the display shows DESCALING then the coffee machine needs to be descaled to ensure best performance.Please note:You

10TroubleshootingThe coffee machine is equipped with an auto-diagnostic system to recognise and advise on how to deal with faults. These alerts will

11fig. 1fig. 2fig. 3InstallationIMPORTANT: THIS APPLIANCE SHOULD BE FITTED BY A SUITABLY QUALIFIED PERSON. WE RECOMMEND THAT YOU SEEK THE HELP OF ANOTH

12fig. 4InstallationPlease note:Due to the weight of this appliance, the furniture unit must be secured to the wall prior to installation.You must ens

13Electrical informationWarning! This appliance must be earthed.The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To

14

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01949 862 00

ImportantThe CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that

Coffee machine 1. Display 2. Control panel 3. Grinder spout 4. Filter handle 5. Dispenser spout 6. Drip tray drawer 7. Steam / Water Nozzle 8.

First useThis coffee machine has two water heaters, one for the water and one for the coffee, which allows for ideal temperatures for coffee, hot wate

To fill the coffee container:1. Pull the machine out of its housing by lifting the handle of the machine and pulling it towards you.2. Remove the lid

The Coffee MachinePress to switch on the coffee machineAfter a few seconds, HELLO will show on the display.The machine will heat up, and COFFEE and

Make a cappuccino We recommend preparing cappuccinos individually so as to ensure best flavour.1. Make a medium espresso as described above in a large

Programming The coffee machine is equipped with a programming mode to enable you to set the following as required:To enter programming mode follow the

Care and Maintenance DO NOT PERFORM ANY MAINTENANCE OR CLEANING WITHOUT FIRST ISOLATING THE MAINS ELECTRICAL SUPPLY.THE COFFEE MACHINE WILL BE HOT IMM