CDA WC140 Datasheet download pdf (Page 6)

Softener adjustment

The efﬁciency of your dishwasher depends on the softness of the tap water. To ensure best efﬁciency, the dishwasher

is equipped with a system that reduces the hardness in the mains water supply. The efﬁciency will increase when the

system is correctly set. To ﬁnd out the water hardness level of your water supply you can use the test strip supplied or

alternatively contact your local water board.

1. Open the testing strip.

2. Run water through the tap for one minute.

3. Hold the testing strip in water for one second.

4. Shake the testing strip after taking it out of the water

5. Wait for one minute

6. Check the number of marks on the strip to see the level of water hardness.

If the hardness of the water you use is above 60 dE or if you are using well water; you are recommended to use lter and

water reﬁnement devices.

Please note: The level of water hardness is preset to level 3.

1. Press and hold down the programme selection button

2. Press the power button to switch on the dishwasher

3. Keep the programme selection button pressed until the ﬁve programme indicator lights and the end of programme

indicator light ﬂash.

4. To adjust the level, press the programme selection button until the required level is selected. The programme lights

will illuminate as in the table of water hardness settings.

5. To store the selected water hardness level, press the power button.

Testing strip

Adjusting salt consumption

Table of Water Hardness Level Settings

NOTE:

The washing effectiveness of your machine depends on the softness of the tap water. For this

reason, your machine is equipped with a system that reduces the hardness in mains water

supply. The washing effectiveness will increase when the system is correctly set. To find out

the water hardness level of water in your area, contact your local water board or determine

water hardness level by using the test strip(if available).

If the hardness of the water you use is above 90 dF (French hardness) or if you are using well

water; you are recommended to use filter and water refinement devices.

Hardness level is adjusted to level 3 as a factory setting.

ENGLISH

Open the

testing

strip.

Run

water

through

your tap

for 1

min.

Keep the

testing

strip in

water for 1

sec.

Shake the

testing strip

after taking it

out of water.

Wait for

1 min.

Make your machine’s water hardness

setting according to the result

obtained through the testing strip.

No Lime

Very low lime content

Low lime content

Medium lime content

Lime content

High Lime content

If the hardness of the water you use is above 63dE or if you are using well water; you are recommended to use ﬁlter and

water reﬁnement devices.

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Comments to this Manuals

No comments

CDA WC140 Datasheet Page 6

Comments to this Manuals

Related products and manuals for Dishwashers CDA WC140