CDA TH100 Specifications download pdf (Page 10)

Troubleshooting

Below is a list of some of the possible malfunctions.

If the problem cannot be resolved as described, contact the

dedicated hot tap Customer Care line (details on back cover).

Problem Possible Cause Remedy

“Set temperature”

indicator ﬂashes

“99”.

Insucient water in

the tank.

Prime the installation as

described in the installation

instructions below.

Water and Steam

is spitting from the

instant hot water tap

spout.

Unit is boiling. Turn the instant hot water tap

handle on and release the

water.

Adjust the water temperature

on the display to a lower

setting.

Water is not hot. The electronic

instant hot water

appliance is

unplugged.

The electronic

unit has not been

powered up.

Make sure the 3 in 1 instant

hot water appliance is

plugged in and connected to

an earthed electricity outlet.

Make sure that the circuit

breaker and fuse are working

correctly.

Turn on the power and touch

the on/o button, then set

the required temperature and

conﬁrm the boiler heats up.

Water is too hot. Water temperature

setting on display

panel is set too

high.

Set the temperature to the

required level and conﬁrm

the boiler heats up.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

CDA TH100 Specifications Page 10

Comments to this Manuals

Related products and manuals for Faucets CDA TH100