CDA FW971 User Manual download pdf (Page 6)

Control panel

A. Power button

To put the fridge freezer on standby press and hold the power button for approximately three seconds. To start the compressor

working again, press and hold the power button for approximately three seconds.

B. Fridge thermostat dial

The fridge temperature is regulated by this dial.

The thermostat can be set between fully anticlockwise (super cool function) and fully clockwise (least cold).

The super cool function can be used when introducing large quantities of fresh food to maintain an optimal temperature in the

fridge section.

To switch on the super cool function, turn the fridge thermostat dial to super cool.

Once the food is sufﬁciently chilled, turn the thermostat dial back to the previous setting.

IMPORTANT Do not use the super cool function for more than 24 hours.

C. Freezer thermostat dial

The freezer temperature is regulated by this dial.

The thermostat can be set between fully anticlockwise (super freeze function) and fully clockwise (least cold).

The super freeze function can be used to freeze large quantities of fresh food as quickly as possible.

To switch on the super freeze function, turn the freezer thermostat dial to super freeze

Once the food is frozen, turn the thermostat dial back to the previous setting.

IMPORTANT Do not use the super freeze function for more than 24 hours.

Door open alarm

This appliance is equipped with an alarm that will activate when the fridge or freezer doors are left open for more than sixty

seconds.

If the fridge door is not closed, the alarm will sound three times every thirty seconds.

ﬁg. 3

Mid

High

S.Cool

Low

REF. FRZ.

Mid

High

S.Cool

Low

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

CDA FW971 User Manual Page 6