Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01949 862 00
10TIPS FOR INSTALLATIONLocation– The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or space contain
11InstallationTechnical Information for the InstallerIn order to install the hob into the kitchen fixture, a hole with the dimensions shown in fig. 12 h
12Fastening the Installation Brackets (fig. 15)– Each hob is provided with an installation kit including brackets and screws for fastening the top to
13Gas supply requirementsImportant Note This appliance is supplied for use on NATURAL GAS or LPG (check the gas regulation label attached on the appli
14Gas ConnectionThe installation of the gas appliance to Natural Gas or LP Gas must be carried out by a suitably qualified and regist
15Gas connection Cat: II 2H3+The fitting (fig. 17) is made up of:– 1 nut “A”– 1 elbow fitting “C”– gasket “F”Connection to the Gas Supply– Be care
16Conversion to Natural Gas or LPGReplacing the Burner Injectors– Remove the pan supports, the burner caps and flame speaders.– Using a wrench, substi
17Regulating the Burner Minimum Setting When changing from one type of gas to another, the minimum tap output must also be correct, considering that i
18Mains Electricity ConnectionIncorrect installation may be dangerous and the manufacturer can not be held responsible.Warning! This appliance must be
19Appliance ServicingCDA provide a quality and effective after-sales service to cover all your servicing needs. Please attach your receipt to this pag
2ImportantThis appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any non domest
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01949 862 00
3Important Safeguards and Recommendations– Do not carry out any cleaning or maintenance without first disconnecting the appliance from t
4Features and Technical DataFig. 1Cooking Points1. Auxiliary burner (A) - 1,00 kW2. Semi-rapid burner (SR) - 1,75 kW3. Rapid burner (R) - 3,00 kW4.
5How to use the hobGas burners Gas flow to the burners is adjusted by turning the knobs (illustrated in fig.2) which control the valves.Turnin
6WRONGCORRECTChoice of Burner The symbols printed on the panel by the side of the knob indicate which burner you are controlling.Choose a suitable bur
7Cleaning and MaintenanceGeneral Tips– Before cleaning the hob switch it off and wait for it to cool down.– Clean with a cloth, hot water and soap or
8Fig. 8Burners and Grids– These parts can be removed and cleaned with appropriate products.– After cleaning, the burners and their flame spreaders must
9Correct Position of Triple Ring BurnerThe triple ring burner must be correctly positioned (see fig. 9); the burner ribs must be fitted in their housi
Comments to this Manuals