CDA ci860 Specifications download pdf (Page 30)

Troubleshooting

All repairs which must be done on the machine should only be

performed by authorised service agents. When a repair is required for

your machine or you are unable to eliminate the failure with the help

of the information given below:

• Unplug the machine.

• Close the water tap.

• Contact CDA Customer Care.

Fault Probable cause Methods of elimination

The machine will not

start.

It is unplugged. Insert the plug into the socket.

The fuse is damaged. Replace the fuse.

There is a fault with the power

supply.

Check the power supply.

The washer door is not properly

closed.

Close the washer door.

“Start” button has not been

pressed.

Press the “Start” button.

“Programme selector” knob is not

set correctly.

Set the “Programme selector” knob

correctly.

The machine does

not ﬁlll with water.

“Start” button has not been

pressed.

Press the “Start” button.

Water tap is not turned on. Turn on the water tap.

Water pressure too low. Check water pressure.

The inlet hose is kinked. Check the inlet hose.

Water supply failure. Check the water supply.

“Programme selector” knob not

set correctly.

Set the “Programme selector” knob

correctly.

Washer door not properly closed. Close the washer door properly.

Inlet hose ﬁlter is blocked. Unblock the inlet hose ﬁlter.

The machine is

draining while being

ﬁlled.

The height of drain hose is too

low.

Install drain hose at the speciﬁed height.

The drain hose is in water. Ensure the drain hose end is not

immersed in water.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Comments to this Manuals

No comments

CDA ci860 Specifications Page 30

Comments to this Manuals

Related products and manuals for Washer dryers CDA ci860