CDA HCC310 Technical Information download pdf (Page 8)

8

Installation Instruction

TECHNICAL INFORMATION

FOR THE INSTALLER

Before installing the cooktop, remove

the protective film.

This cooktop can be built into a

working surface 30 to 40 mm thick

and 600 mm deep.

In order to install the ceramic griddle

into the kitchen fixture, a hole with

the dimensions shown in fig. 3 has

to be made, keeping in considera-

tion the following:

✓ within the fixture, between the

bottom side of the ceramic griddle

and the upper surface of any

other appliance or internal shelf

there must be a clearance of at

least 30 mm;

✓ the ceramic griddle must be kept

no less than 300 mm away from

any side wall;

✓ the rear wall must be at least 50

mm from the ceramic griddle and

must withstand a temperature of

150°C.

✓ there must be a distance of at least

650 mm between the hob and

any wall cupboard or extractor

hood positioned immediately

above (see fig. 4)

✓ the coatings of the walls of the

unit or appliances near the

cooktop must be heat resistant (“X”

protection against heating in

compliance with standards EN

60335-2-6).

✓ Do not instal the appliance near

inflammable materials (eg.

curtains).

650 mm

450 mm

300 mm

490

510

270

288

50

+ 0

– 2

+ 0

– 2

Figure 3

Figure 4

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments