CDA RC9300 Operations Instructions download pdf (Page 34)

Adjusting of the minimum of the top burners

Considering that in the minimum position the flame must have a length of about 4 mm

and must remain lit even with a quick turn from the maximum position to that of mini-

mum.

The flame adjustment is done in the following way:

– Turn on the burner

– Turn the tap to the MINIMUM position

– Take off the knob

– With a small flat screwdriver turn the screw inside the tap rod to the correct regula-

tion (fig. 39).

Normally for LPG, tighten up the regulation screw.

Fig. 39

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

No comments

CDA RC9300 Operations Instructions Page 34