CDA WC140 Manual download pdf (Page 26)

26

Fig. 14

Fig. 15

Fig. 16

Installation

• Do not install this appliance if it is

damaged in any way. Installing a

damaged appliance may invalidate the

warranty.

• The water supply tap should be located

in an adjacent cupboard so that it can be

accessed after installation.

• Ensure the appliance is level by adjusting

the feet as necessary.

• Only use the water inlet supplied with the

appliance.

• If the water pressure is above 10 bar, a

pressure relief valve should be used.

• After connecting the water supply, check

to ensure there are no leaks.

• The water outlet can either be connected

to a water drain or to a sink outlet spigot.

This connection should be at a minimum

of 50cm and a maximum of 110cm from

the ﬂoor. The drain hose should be no

longer than 4m in length to ensure good

performance from the dishwasher.

1 2 ... 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments