Care and maintenance
Always disconnect the appliance from the power before any cleaning or maintenance.
As the icemaker has a stainless steel or enamel surface, you should use a nonabrasive cleaner. Any abrasive cleaner (including Cif)
will scratch the surface and could erase the control panel markings. Stainless steel can be effectively cleaned by simply using a
dilute solution of water and mild detergent and drying to a shine with a clean cloth.
Proprietary stainless steel cleaners are available. We recommend the CDA E-Cloth available from the CDA Sales Team for cleaning
stainless steel surfaces.
You should remove and clean regularly the water tank, the ice compartment drawer and both sections of the drip tray.
Once cleaning is complete, reconnect the mains power supply.
If the appliance is not to be used for prolonged periods of time, you should empty, clean thoroughly and unplug the appliance.
To empty the icemaker, follow the steps below:
1. Press and hold button
and together and then press button . This will empty the water in the
icemaker’s internal system. The display will show ICE OFF WATER EMPTY to confirm the icemaker’s internal
system is empty.
2. Empty the ice from the ice compartment.
3. Place a jug under the water nozzle and press button
until no more water is dispensed.
4. To make sure the pipework is completely empty, you should unscrew the cap at the back, using a cup to catch
the last of the water.
Cleaning the pipes
You should follow the steps below in order to remove any impurities from the system and ensure best performance from your ice
maker. Failure to carry out this simple procedure regularly could cause problems or damage to the workings of the icemaker.
1. Turn off the mains water supply, if applicable
2. Use a sterilising solution such as Milton fluid to clean the removable ice drawer and the ice drawer housing. Follow
the instructions supplied with the sterilising solution to ensure the ice drawer is thoroughly cleaned.
3. Fill the internal water tank with 2.5l of water then add a spoonful of bicarbonate of soda to the water.
4. Use the water empty function (press and hold
and , then press before emptying the water tank by
holding
) to flush the system through with the bicarbonate solution from the water tank.
5. Repeat steps 3 and 4.
6. Fill the water tank with 2.5l of water
7. Use the water empty function (press and hold
and , then press before emptying the water tank by holding
) to clear out any bicarbonate solution remaining.
8. Repeat steps 6 and 7.
9. Turn the ice maker off
10. Turn the mains water supply back on, if applicable, or fill the water tank.
11. Turn the ice maker on. Normal operation will resume.
Bicarbonate of soda is a safe compound and poses no risk to health. It is commonly available and is sold in all supermarkets.
IMPORTANT:
Steam cleaners must not be used when cleaning this appliance.
Ensure that all parts are correctly replaced after cleaning before attempting to use the icemaker.
5
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals