CDA sk650 Specifications

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01949 862 003 E : se

10Before First UseWhen the oven is connected to the electrical supply the latch mechanism runs an automatic self-test by locking then unlocking the ov

11Before using the oven for the rst time we recommend that you clean it with soapy water, rinse carefully and then heat on the fan oven setting at ma

12To turn the oven o Turn the “Function control” knob to the “O” position, the oven gives three short beeps and the word ”O” appears briefly on the

13Conventional Eco oven Turn the “Function control” knob to the “Conventional Eco oven” position. In this setting, the oven cooling fan only comes on

14Fanned half grill Turn the “Function control” knob to the “Fanned half grill” position. The fanned half grill programme uses the grill element for g

15Full Grill Turn the “Function control” knob to the “Full grill” position. The full grill programme uses the centre and outer grill elements to pr

16Please note: Before any pyrolytic programme, remove all shelves, trays and other accessories from the oven and clean up any major spills to avoid th

17• It is now set at the revised time.When the pyrolytic clean finishes the display shows “P---” and the “Auto timing indicator” flashes. • The dis

18Timer and Minute MinderTimer functions are selected by pressing the “Temperature control” knob. This switches the digital display between them:-Clo

19showing the current time. The “Auto timing indicator” and the “Auto cooking indicator” illuminate.• The timer is now set.• At the end of the s

2ImportantThis appliance must only be used for the purpose for which it is intended, i.e. domestic cooking, defrosting and reheating foods. Any other

20• The beeper can be silenced by briey turning the “Temperature control” knob clockwise or anticlockwise, then letting it return to its rest positi

21Care and MaintenanceIMPORTANT:Always disconnect the appliance from the power supply before undertaking any cleaning or maintenance.You should always

22Oven Door Removal For CleaningTo remove the oven door (Fig. 7)1 Open the door completely.2 Lift the hinge bracket (1).3 Hold the door firmly on

23Door Glass Removal and ReplacementNote: Suitable protective gloves should be worn for this process.• Remove the door, as above and lie it, face do

24CleaningYou should only use non-abrasive cleaners. Any abrasive cleaners (including Cif) will scratch the surface and could erase the control panel

25intense heat will burn o any splashes. The interior ceiling may need regular cleaning, which should be done with warm water, detergent and a spong

26• Switch o (or disconnect) the power supply to the appliance.• Contact CDA Customer Care.InstallationThe appliance can be installed under a work

27Fig. 12Fault Code Fault descriptionE1 Temperature sensor faultyE2 Temperature sensor short circuitE4 Temperature sensor circuit failureE8 Latch time

28Mains Electricity ConnectionWarning! This appliance must be earthedWe recommend that the appliance is connected by a qualified electrician, who is a

29This appliance is supplied with a 3 core mains cable; the wires are in accordance with the following code:Green and Yellow = EarthBlue = NeutralBrow

3CE Declarations of Conformity:This oven has been designed, constructed and marketed in compliance with safety requirements of EEC Directive 2006/95/E

30

31E & O E. All instructions, dimensions and illustrations are provided for guidance only. CDA reserve the right to change specifications without

Please contact our Customer Care Department for Service on the details below.Customer Care Department • The Group Ltd. • Harby Road • Langar

4Important• Do not dismantle any parts withou disconnecting the oven from the mains power supply.• Do not use the appliance if any part is broken (f

5• In order to avoid damage to the oven enamel coat, do not cover the oven base with any item (e.g. aluminum foil, pans and the likes).• Do not use

6• Do not place hot enamel parts in water. Leave them to cool rst.• Do not allow vinegar, coee, milk, saltwater, lemon or tomato juice to remain i

7Fig. 2Fitting Out Your ApplianceOven rack positionsThe oven racks can be positioned in any one of four pairs of guides at diering levels. At each l

8The Control PanelFig. 3Fig. 4Temperature control Digital Display Function controlDoor lock LEDTime LEDHeating LEDTimer indicatorTemperature LEDAuto t

9Fig. 5Function Control Knob in DetailDefrostConventionalovenFan withlower heatLightFan ovenFanned halfgrillOConventionalEco ovenHalf grillFull grill