CDA 9Z6 Owner's Manual download pdf (Page 15)

13-EN

Memorizing the Time

Correction Setting

1 Adjust the time correction setting.

(Refer to page 14)

2 Press the F button within 10 seconds of step 1.

3 Within 10 seconds after operating step 2, press

and hold any one of the Preset buttons (F1

through F6) for at least 2 seconds. To memorize

further, repeat the step 1 to 3.

Recalling the Memorized Time

Correction Setting

1 Press the Digital Time Correction button to

switch to the Time Correction mode.

2 To recall your preset, pressing one of the Preset

buttons (F1 through F6) within 10 seconds

after the operation in step 1. You can recall the

memorized setting.

Adjusting the Equalizer Settings

You can modify the Equalizer settings to create a

response curve more appealing to your personal

taste.

1 Select the equalizer characteristic to adjust.

See Equalizer Presets (page 12).

2 Press and hold the 7-Band Graphic EQ button

for at least 2 seconds within 10 seconds of step 1.

3 Press either the F1 or F2 button within 10

seconds of step 2, to select the frequency band

to adjust.

→ 63Hz ←→ 160Hz ←→ 400Hz ←→ 1kHz ←

→ 16kHz ←→ 6.3kHz ←→ 2.5kHz ←

4 While the FUNC (Function) indicators is flashing,

press either the DN g button or the f UP

button to adjust to the desired level.

To adjust another frequency band, repeat the

above procedure.

NOTE

All band levels will become flat when the F6 button is

pressed.

Memorizing the Equalizer Settings

1 Recalls the manufacturer's settings of the

equalizer. In addition, allows you to store your

own sound preferences for later recall. (see this

page)

2 Press the F button within 10 seconds of step 1.

3 Within 10 seconds after operating step 2, press

and hold any one of the Preset buttons (F1

through F6) for at least 2 seconds.

4 Repeat steps 1 to 3 to store other settings.

Recalling the Memorized Equalizer

1 Press 7-Band Graphic EQ button to switch to

the EQ mode.

2 Press the F button.

3 To recall your preset, pressing one of the Preset

buttons (F1 through F6) within 10 seconds

after the operation in Section 2. This provides

sound characteristics of your own design.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comments to this Manuals

No comments

CDA 9Z6 Owner's Manual Page 15

Comments to this Manuals