CDA FF880 Manual download pdf (Page 4)

Control Panel

Switching the freezer on and o

To switch on the freezer for the rst time, press and hold the On/O key (A) for three seconds. The freezer will beep twice, and

will run at the factory preset temperature of -18°. To switch the freezer o, press and hold the On/O key for three seconds.

Setting the temperature

Press the increase or decrease temperature keys (B & C) to select the required temperature between -16° and -24°. Once the

required temperature is shown on the display, the temperature will set after ve seconds’ delay and the freezer will beep twice to

conrm the setting.

The freezer will take some time to adjust to the new settings. This will depend on the dierence between the old and new

settings, the ambient temperature, the amount of food in the freezer and the number of times the door is opened.

Over temperature alarm

The freezer is equipped with an over temperature alarm to warn when the termperature in the freezer has been over -8° for

six hours or more. The fridge will beep ten times every thirty minutes until the freezer temperature is below -12°, and the fault

code E9 will show on the display. Press any key to switch the alarm o. E9 will continue to show on the display until the fault is

resolved.

A On/O key

B Increase temperature key

C Decrease temperature key

D Quick freeze function key

E Quick freeze indicator

g. 1

1 2 3 4 5 6 7 8 9 10 11 12

No comments

CDA FF880 Manual Page 4