CDA FF880 Manual download pdf (Page 8)

Installation and Ventilation

This appliance must never be installed close to heat sources i.e.

heating elements, cookers or in damp places.

The diagram shows the ventilation requirements for your product.

Failure to provide adequate ventilation can lead to increased running

costs and premature failure and may invalidate the warranty provided

with the product.

• Ensure ventilation openings are kept clear.

• Do not use a multi-purpose socket alongside other appliances.

• Do not tilt the fridge beyond 45º

• Do not exert excessive pressure on the appliance.

• Place the refrigerator in a well-ventilated position, away from heat

sources, damp and direct sunlight.

• Ensure that a gap of no less than 50mm is left above the

appliance and that the gap around the outside is no less than

100mm to allow the door to open fully (g. 3).

• If the appliance is to be installed enclosed between units, please

ensure there is a 50mm gap above the appliance and a 100mm

gap at the rear of the appliance to the ceiling or any furniture

above (g. 4).

g. 2

1855

695

595

g. 3

g. 4

ff880

front view

50mmmin.

100mm

min.

100mm

min.

ff880

sideview

50mmmin.

100mm

min.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

CDA FF880 Manual Page 8