CDA 7 Maintenance Manual
B-12 77 A7 48UU Rev03
DSB80-DSB95 DEFINE EXTENT/LOCATE DATA
DSB96-DSB103 Drive serial number
DSB104-DSB107 If (DSB104 = 0xFF)
DSB105 = 0x00
DSB106 = 0x00 ou 0x01( Fuse SCSI port0 blown)
DSB107 = 0x00 ou 0x01( Fuse SCSI port1 blown)
Else if ( Device type = 80 or 81(EMC) and DSB[45] not
equal to 00)
The information bytes contains a value which represents a
complementary Degraded mode information.
DSB 108-DSB115 RFU
DSB116
Error type
0x01 air_error
0x02 rstrecov_successful but error in recovery.
0x03 rstrecov_timeout
0x04 rstrecov_bsy_nrdy (busy or not ready after reset)
0x05 rstrecov_fault (device fault on retry command)
0x06 rstrecov_reserv (reserved after reset)
0x07 rst_unk_err
0x08 rstrecov_fetchcce_err (recovery err during fetch_cce)
0x09 rstrecov_ok
0x0A endcb_modsel_err
0x0B endcb_seize_err
0x0C unlock_recov_err
0x0D arc_test_ok
0x0E arc_test_ko
0x0F reserv_after_chkcond_extd
0x10 modsel_chd
0x80 endcb_release_err: 10xx xxxx =>xx xxxx (compl. err)
Comments to this Manuals