CDA maintenance User's Guide download pdf (Page 149)

Installing the CDA 7 5330 with Microcode Release 5263

77 A7 48UU Rev03 C-29

Remember that the MNCONF "LABEL" command will give almost the same

layout showing the distribution of disks on each SCSI channel, for cabling the

subsystem and the name of the binfile.

1. Press F10. A dialog box is displayed.

2. Enter the password and the first screen in which you selected Change

reappears.

CURRENT CONFIGURATION:

---------------------

DA Code: REVISION: CC73DA01; CHECKSUM: 01EF2E96: DATE: 01/27/1995

MTPF number: 000059C1; MTPF date: 07/06/1995;

SA Code: REVISION: FB73AA01; CHECKSUM: 018DCCBC: DATE: 01/27/1995

MTPF number: 000059C7; MTPF date: 07/06/1995;

RS232 baud: 33400 8 bits; Cache Fast Write Ceiling: 80%;

Emulation: FBA:Mix; Time to shut off Battery: 120 Seconds; Mirroring: YES;

Prefetch: Dynamic Spare: NO; Microprocessor I/O cache: YES/YES;

Server/Bull: Online Tests;

<L>oad, <S>ave, <B>oth, <C>hange, <D>isplay, <A>dvanced, <Q>uit?

3. Select Both (Save and Load). The dialog box asking for the password is

displayed.

You save the configuration with any changes you have made on the PC disk,

and load the MICROCODE in DIRECTORS.

4. To format the disk-drives, go to the main menu and select VTOC ALL

DRIVES IN SYSTEM or enter E. Depending on the configuration, this

operation will take some time (about 20 minutes).

At the end of this operation your system is initialized and loaded, but the

DIRECTORS are still disable.

5. Under MS-DOS, save the IMPL.BIN and SITEINFO.DAT files onto a

diskette. Keep this diskette carefully as a backup.

To do this:

1. Press Escape to exit the main menu.

2. Confirm your request. The C:\SYMM4 prompt is displayed.

3. Insert the diskette.

4. Enter the following command:

C:\SYMM4 > COPY C:\SYMM4\IMPL.BIN A:\<goodfile.bin>

5. Return to the main menu with the command:

C:\SYMM4 > LOOP

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 257 258

No comments

CDA maintenance User's Guide Page 149