CDA maintenance User's Guide Page 66

  • Download
  • Add to my manuals
  • Print
  • Page
    / 258
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 65
CDA 7 Maintenance Manual
3-16 77 A7 48UU Rev03
3.3.5 Replacing the Battery
The procedure for replacing the battery is as follows:
1. Turn the battery OFF.
2. Remove the two screws from the left of the battery.
3. Remove the PS1/PS2 Power/Battery cables.
4. Use the handle to pull the battery backwards (be careful, it is very heavy)
5. Position the new battery in the cabinet.
6. Replace the battery retaining screws.
7. Plug in the PS1/PS2 Power/Battery cables.
8. Turn the battery ON.
Figure 3-3 shows you how to unmount the lateral panel if necessary:
Right cover Right cover
CDA frame
1. Pull down the lock 2. Slide the right cover 3. Extract the cover
Figure 3-3. Unmounting Lateral Panel
1. Locate the locking tab under the right cover.
2. Pull it down to clear the lock.
3. Slide the cover at the same time to clear it from its four retaining lugs.
4. Remove the cover by pulling it towards you.
Page view 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 257 258

Comments to this Manuals

No comments